Utilization of Arduino Control in Mitigating the Hybrid Harmonics of DC/AC Inverter 
N.Amutha Priya
N. Amutha Priya,Assistant Professor – EEE, Rohini College of Engineering and Technology,Vallioor.
Manuscript received on 14 April 2021 | Revised Manuscript received on 12 May 2021 | Manuscript Accepted on 15 September 2021 | Manuscript published on 30 September 2021 | PP: 5-8 | Volume-1 Issue-2, September 2021 | Retrieval Number: 100.1/ijvlsid.B1202091221 | DOI:10.54105/ijvlsid.B1202.091221
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Published by Lattice Science Publication (LSP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This Paper deals with the implementation of Harmonics distortion in distribution system by using the method of hybrid of active filter and passive filters. The active filter is used to reduce the distortion present in the output. Boost converter is used to increase the voltage level. This boost converter is connected to the inverter, which is designed by using the MOSFET as a switch. In practical application the pulses for the inverter is given by using the Arduino control. By using this hybrid method, the total harmonics distortion is reduced to below the acceptable limit. Simulation for this proposed method is done by using the MATLAB Simulink. Initially, fast fourier transform may found to mitigate harmonics. But emerging technologies like Arduino control is proved to simple and economical in carrying out the same task effectively.
Keywords: In Practical Application The Pulses For The Inverter Is Given By Using The Arduino Control.
Scope of the Article: Emerging Technologies